TM 5-3610-253-14
5-16. MAINTENANCE PROCEDURES.
a. This section contains instructions covering organizational maintenance
funtions for the paper cutter. Personnel required are listed only if the task
requires more than one.
b. After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
INDEX
PARAGRAPH
PROCEDURES
Replace Main Drive Gear Clutch Pads . . . . . . . . . . . . . . . . ...5-16.1
Replace Main Drive Gear Clutch Brakes . . . . . . . . . . . . . . . ...5-16.2
Replace Main Drive Motor Overload Relay. . . . . . . . . . . . . . . . . 5-16.3
Replace Main Drive Motor V-Belts. . . . . . . . . . . . . . . . . . . .5-16.4
Replace Main Drive Motor. . . . . . . . . . . . . . . . . . . . . . . .5-16.5
Replace Backgauge Motor V-Belt . . . . . . . . . . . . . . . . . . ...5-16.6
Replace Backgauge Motor . . . . . . . . . . . . . . . . . . . . . . . .5-16.7
Replace Backgauge Overload Relay . . . . . . . . . . . . . . . . . . . . 5-16.8
Replace Backgauge Limit Switches . . . . . . . . . . . . . . . . . . . . 5-16.9
Replace Clamp Foot Pedal . . . . . . . . . . . . . . . . . . . . . ..5-16.10
Replace Clamp Return Spring . . . . . . . . . . . . . . . . . . . . . . .5-16.11
Replace Clamp Pedal Switch . . . . . . . . . . . . . . . . . . . . . ..5-16.12
Replace Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16.13
Replace Connecting Rod Shear Bolts . . . . . . . . . . . . . . . . . . . 5-16.14
Replace Main Power Switch and/or Control Power On Switch . . . . . . . . 5-16.15
Replace Cutting Button(s) . . . . . . . . . . . . . . . . . . . . . ..5-16.16
Replace Safety Bolt Assembly . . . . . . . . . . . . . . . . . . . . ..5-16.17
Replace Gear Limit Switches . . . . . . . . . . . . . . . . . . . . . .5-16.18
Repair Left Light Barrier Assembly . . . . . . . . . . . . . . . . . . . 5-16.19
Repair Right Light Barrier Assembly. . . . . . . . . . . . . . . . . . . 5-16.20
5-138
