TM 5-3610-253-14
If clearance is more than 0.4 mm (.016 in.), remove brake pads and add
i.
spacer foils until proper gap is obtained.
Remove the reset handles.
j.
k. Rotate the safety plate left and cover the override holes.
Remove main power knob and reinstall onto main power switch.
l.
m.
Reinstall main motor V-belt cover.
n.
Place operator key back into safety lock.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS: Offset Flat Tip Screwdriver
Flat Tip Screwdriver
SUPPLIES: Overload Relay
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn main power switch to 0 position.
(2) Using operator key, lock safety lock and keep key in your
5-143
