TM 5-3610-253-14
c.
Remove nut(s) and defective shear bolt(s).
d.
Aline flanges by manually moving knife carrier (paragraph 5-16.27).
e.
Install new shear bolt(s) and secure with nut(s).
f.
Perform manual knife carrier movement to raise knife to top dead center
Reinstall eccentric cover.
g.
h.
Place operator key back into safety lock.
Replace Main Power Switch and/or Control Power On Switch.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Electrician's Knife
Flat Tip Screwdrivers
Heat Shrink Gun
SUPPLIES: Main Power Switch
Control Power Switch
1-1/2 in. Shrink Tubing
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn main power switch to 0 position.
5-172
