TM 5-3610-253-14
Table 5-8. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
KNIFE AND CLAMP DO NOT OPERATE WHEN CUTTING
LIGHT BARRIER IS OPERATIONAL.
21.
BUTTONS ARE PRESSED - Cont
Check continuity of fuses e5 and e11 on motherboard.
Step 1.
(a) If continuity is not present, replace defective fuse.
(b) If fuses are not defective, proceed to step 2.
Test continuity of cutting buttons.
Step 2.
5-133
