TM 5-3610-253-14
Table 5-8. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
22.
LIGHT BARRIER IS OPERATIONAL. KNIFE STOPS MIDWAY UP AFTER CUT. CLAMP
OPERATES.
Check position of gear limit switch rollers on surface of cams.
Step 1.
(a) If cams are not positioned correctly, adjust gear limit
switches (paragraph 5-16.18, step h).
(b) If adjustment is correct, proceed to step 2.
Check continuity of gear limit switches.
Step 2.
(a) If continuity is incorrect, rep ace gear limit switches
(b) If continuity is correct, refer to direct/general support
maintenance.
