TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: 24 mm Combination Wrench
17 mm Combination Wrench
Flat Tip Screwdriver
10 in. Adjustable Wrench
Snap Ring Pliers
SUPPLIES: Return Spring
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a.
Turn off power.
(1)
Turn main power switch to 0 position.
(2)
Using operator key, lock safety lock and keep key in your
b. Remove rear electronics enclosure cover.
NOTE
Be sure to record the number of turns the adjustment nut is rotated.
The same number of turns are required to reinstall adjusting nut properly.
c. Loosen the return spring fully by rotating adjusting nut to the left.
5-160
