TM 5-3610-253-14
f. Remove mounting bolts and defective motor.
g. Install new motor and secure in place with mounting bolts.
h. Reinstall conduit and conduit connector to electrical box on new motor.
i. Reconnect wiring to new motor.
j. Perform steps h. through t. of paragraph 5-16.4 to reinstall V-belts.
Replace Backgauge Motor V-Belt.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: 10 mm Combination Wrench
13 mm Combination Wrench
19 mm Combination Wrench
Flat Tip Screwdriver
SUPPLIES: V-Belt
Wire Ties
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
5-152
