TM 5-3610-253-14
h. Insert new relay and reinstall screws. Turn swing tabs so they will
press against panel when tightened.
Reinstall relay cover.
i.
j. Position mounting plate and secure with screws.
k. Place operator key back into safety lock.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
19 mm Combination Wrench
SUPPLIES: V-Belts
NOTE
Always replace both V-belts when replacing either belt.
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1)
Turn main power switch to 0 position.
Using operator key, lock safety lock and keep key in your
(2)
b. Remove main motor V-belt cover.
Remove inner V-belt cover.
c.
d. Standing behind motor, place screwdriver under motor pulley between
pulley and hydraulic pump V-belt.
5-145
