TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: 13 mm Combination Wrench
Flat Tip Screwdriver
Clamp Foot Pedal
SUPPLIES:
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn main power switch to 0 position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove rear electronics enclosure cover.
c.
Remove retaining bolt and wedge on rear of clamp foot pedal, and then
remove defective clamp foot pedal from the front side of the cutter.
d.
Insert new clamp foot pedal from the front, and secure with
retaining bolt and wedge.
e.
Reinstall rear electronics enclosure cover.
f. Place operator key back into safety lock.
Perform clamp foot pedal adjustments (paragraph 5-16.12, step h).
g.
5-159
