TM 5-3610-253-14
NOTE
Always use new O-rings.
Install new O-rings and new P1 block. Secure with mounting bolts.
g.
h. Reconnect plug connectors.
Bleed the hydraulic system (paragraph 5-40.65).
i.
Adjust clamp foot pedal pressure (paragraph 5-40.55).
j.
k. Adjust clamp pressure (paragraph 5-40.56).
5-40.19 Replace P2 Block.
MOS: 83FJ6, Reproduction Equipment Repairer
Flat Tip Screwdriver
TOOLS:
13 mm Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
4 mm Hex Head T-Wrench
SUPPLIES: P2 Block
O-rings
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using the operator key, lock safety lock and keep key in your
b. Remove front electronics enclosure cover.
Remove right pillar cover.
c.
Remove bolts and hydraulic system cover plate.
d.
5-543
