TM 5-3610-253-14
f. Remove nut and yellow cable from top of inch valve.
Remove large filter to allow for access to inch valve.
g.
Remove pipe and defective inch
h. Loosen nut at top portion of L-pipe.
valve.
i.
Install pipe to new inch valve and tighten nut.
Reinstall large filter.
j.
k. Reinstall yellow cable to top of inch valve and secure with nut.
l.
Fill hydraulic reservoir with 17 liters (4.5 gallons) of fluid. Observe
sight glass for exact quantity required.
m.
Bleed hydraulic system (paragraph 5-40.65).
5-548
