TM 5-3610-253-14
If the space is greater than 0.3 mm (.012 in.), remove foils behind side
n.
ledge of clamp as required (paragraph 5-40.64).
Manually position knife to its uppermost position.
o.
Remove knife reset handles and rotate safety plate to cover override
p.
holes.
Turn Star-Delta switch to Y position and then to O position.
q.
Reinstall main motor V-belt (paragraph 5-36.4).
r.
Reinstall main motor V-belt cover.
s.
5-40.18 Replace P1 Block.
83FJ6, Reproduction Equipment Repairer
MOS:
Flat Tip Screwdriver
TOOLS:
13 mm Socket with 3/8 in. Drive
8 mm Hex Head Socket Bit with 3/8 in. Drive
3/8 in. Drive Ratchet
SUPPLIES: P1 Block
O-rings
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using the operator key, lock safety lock and keep key in your
Remove front electronics enclosure cover.
b.
Remove right pillar cover.
c.
d. Remove bolts and hydraulic system cover plate.
5-541
