TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
Offset Flat Tip Screwdriver
22 mm Combination Wrench
10 mm Combination Wrench
13 mm Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
5 mm Hex Head Key Wrench
Flashlight
SUPPLIES: Rags (Item 21, Appendix E)
Small Oil Drip Pan
NOTE
Steps a. through f. are completed with power off.
a.
Remove front electronics enclosure cover.
b. Remove right pillar cover.
c.
Remove bolts and hydraulic system cover plate.
d. Remove clamp piston cover plate.
e.
Protect MC unit from possible hydraulic fluid splash.
f. Place rags around clamp piston housing to protect it from possible
hydraulic fluid splash.
Turn on power.
g.
(1) Using operator key, unlock the safety lock.
(2) Turn main power switch to I position.
(3) Turn Star-Delta switch to Y position. After main motor has reached
full speed, turn switch to
position.
(4) Press control power on switch.
h. Move the backgauge forward or backward as required until the backgauge
position is displayed on measurement display.
5-644
