TM 5-3610-253-14
NOTE
Always use new O-rings.
Install new O-rings and new P2 block. Secure with mounting bolts.
g.
h.
Reconnect plug connectors.
i.
Bleed the hydraulic system (paragraph 5-40.65).
Adjust clutch pressure (paragraph 5-40.57).
j.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
13 mm Socket with 3/8 in. Drive
4 mm Hex Head Socket Bit with 3/8 in. Drive
3/8 in. Drive Ratchet
SUPPLIES:
Locking Valve
Clamping Valve
O-Rings
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using the operator key, lock safety lock and keep key in your
b. Remove front electronics enclosure cover.
c.
Remove right pillar cover.
d. Remove bolts and hydraulic system cover plate.
5-545
