TM 5-3610-253-14
Using the tip of the knife carrying handle, press in the locking pin and
g.
rotate the safety cover to the right to gain access to the override
holes on clutch.
h.
Insert the knife reset handles into the holes.
i.
Pressing in on the handles, rotate the pulley until the threads engage,
then tighten the handles.
WARNING
Be sure personnel and foreign materials are clear of the cutting and
clamping area before pressing the cutting buttons. Death or serious
injury may occur.
Have an assistant press and hold the cutting buttons.
j.
WARNING
Always keep clear of moving parts while performing this task. Serious
injury may occur.
k. Manually lower the knife to the height of the clamp.
l.
Check the clearance between the knife and the clamp.
m.
Release the cutting buttons.
5-540
