TM 5-3610-253-14
Reinstall front electronics enclosure cover.
ai.
Place operator key back into safety lock.
aj.
MOS: 83FJ6, Reproduction Equipment Repairer
Flat Tip Screwdriver
TOOLS:
13 mm Socket with 3/8 in. Drive
19 mm Deep Well Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
6 mm Hex Head Key Wrench
22 mm Combination Wrench
0-150 Bar Manometer Gage
Remove front electronics enclosure cover.
a.
b. Remove right pillar cover.
Remove bolts and hydraulic system cover plate.
c.
d. Remove nut and ball on test fitting on P1 side of control block.
e.
Install manometer gage onto test fitting.
f. Turn on power.
Using operator key, unlock the safety lock.
(1)
Turn main power switch to I position.
(2)
Turn Star-Delta switch to Y position. After main motor has reached
(3)
full speed, turn switch to
position.
Press control power on switch.
(4)
Move the backgauge forward or backward as required until backgauge
g.
position is displayed on measurement display.
5-624
