TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
Flat Tip Screwdriver
22 mm Combination Wrench
10 mm Combination Wrench
6 mm Hex Head Key Wrench
Manometer
a.
Turn on power.
(1) Using operator key, unlock safety lock.
(2) Turn main power switch to I position and allow the paper cutter
to run for 30 minutes to stabilize hydraulic fluid temperature.
b. Turn main power switch to O position.
c.
Remove bleed cap from clamp bleed port and connect manometer to bleed
port.
d. Turn main power switch to I position.
Press control power on switch.
e.
5-279
