TM 5-3610-253-14
bq.
Reinstall rear electronics enclosure cover.
br.
Reinstall foot pedal cover.
bs.
Install power cable and connector.
bt. Reconnect input power wires.
bu.
Remove sheets of metal.
bv.
Install all tiedowns.
bw. Reinstall all loose objects and strapped down material.
bx.
Reinstall shock mounts for paper shredder.
Reinstall photolithographic cabinet (paragraph 8-16.3).
by.
Reinstall roadside wall storage cabinets (paragraph 8-16.2).
bz.
ca.
Reinstall photolithographic cabinet (paragraph 8-16.4).
cb.
Reinstall book and pamphlet stitcher (paragraph 3-16.10).
cc.
Reinstall paper drilling machine (paragraph 2-16.7).
cd.
Reinstall bindery table (paragraph 8-16.1).
ce.
Reinstall paper shredder (paragraph 4-20.10).
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS: Flat Tip Screwdriver
22 mm Combination Wrench
19 mm Combination Wrench
6 mm Hex Head Key Wrench
Manometer
a. Turn on power.
(1)
Using operator key, unlock safety lock.
Turn main power switch to I position and allow the paper cutter
(2)
to run for 30 minutes to stabilize hydraulic fluid temperature.
b. Turn main power switch to O position.
5-276
