TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL:
Two persons are required to perform this procedure.
TOOLS:
Flat Tip Screwdriver
22 mm Combination Wrench
19 mm Combination Wrench
6 mm Hex Head Key Wrench
Manometer
Turn on power.
a.
(1)
Using operator key, unlock safety lock.
(2)
Turn main power switch to I position and allow the paper cutter
to run for 30 minutes to stabilize hydraulic fluid temperature.
Turn main power switch to O position
b.
c.
Remove bleed cap from clutch bleed port and connect manometer to bleed
port.
Turn main power switch to I position.
d.
Press control power on switch.
e.
5-282