TM 5-3610-253-14
Manually rotate clutch and install connecting rod shear bolts.
q.
Reinstall top cover.
r.
s.
Reinstall eccentric cover plate.
Reinstall clutch V-belt (paragraph 5-16.4).
t.
Reinstall both sides of the main motor V-belt cover.
u.
v.
Reconnect the hydraulic pipe.
w.
Reinstall gear limit switches and mounting plate.
Reinstall the nylon cams and washers/spacers.
x.
y. Reinstall the cover over the gear limit switches.
Add gear oil to gear box as necessary to fill.
z.
aa.
Perform knife replacement procedures to readjust all carrier adjustments
ab.
Bleed the hydraulic system (paragraph 5-20.23).
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Six persons are required to perform this procedure.
TOOLS: Flat Tip Screwdriver
15/16 in. Socket with 1/2 in. Drive
1/2 in. Drive Ratchet
13 mm Combination Wrench
23 mm Combination Wrench
15 mm Combination Wrench
14 mm Hex Head Key Wrench
17 mm Hex Head Key Wrench
5 mm Hex Head Key Wrench
7/16 in. Combination Wrench
Crow Bar
Long Tine Fork Lift
Hydraulic Pallet
Paper Cutter
SUPPLIES:
a. Remove paper shredder (paragraph 4-20. 10).
b. Remove bindery table (paragraph 8-16.1).
c. Remove paper drilling machine (paragraph 2-16.7).
5-270
