TM 5-3610-253-14
Rotate knob to the right to uncover the clutch override holes.
e.
f.
Insert the reset handles into the override holes and rotate to the
right until the threads engage. Tighten handles.
NOTE
It may be necessary to remove the safety bolt cover and hold the safety
bolt back to move the knife through its movement.
Rotate handles and main drive gear to the right until the carrier is
g.
in such a position that the connecting rod pin is just clear of the
frame (looking from the rear of the machine).
h.
Remove eccentric cover.
i.
Remove shear bolts.
5-265
