TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
Four persons are required to perform this procedure.
PERSONNEL:
Flat Tip Screwdriver
TOOLS:
24 mm Combination Wrench
22 mm Combination Wrench
19 mm Combination Wrench
5 mm Hex Head Socket Bit with 3/8 in. Drive
17 mm Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
19 mm Socket with 3/8 in. Drive
Pry Bar
Ball Peen Hammer
1/4 in. Punch, 8 in. long
SUPPLIES: Main Drive Gear and Clutch Assembly
Pail
Liquid Gasket (Item 14, Appendix E)
Gear Oil (Item 10, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
Remove the cover over the gear limit switches.
b.
Remove the nylon cams and washers/spacers.
c.
Remove gear limit switch mounting plate.
d.
5-267
