TM 5-3610-253-14
WARNING
Serious injury may occur if knife carrier assembly is not blocked with
2 x 4's.
l.
Remove grease fitting nut and connecting rod from eccentric.
Serious injury may occur if inadequate number of personnel are used to
move main drive gear and clutch assembly. This equipment weighs
approximately 280 lbs (127 kg).
Have three persons holding the main drive gear and clutch assembly from
m.
behind the cutter. A fourth person must remove the mounting bolts and
carefully remove defective main drive gear and clutch assembly.
n.
Drive out pin and pry eccentric from drive shaft.
Reinstall eccentric by alining tab and carefully tap eccentric onto
o.
shaft with hammer.
Have three persons install the new main drive gear and clutch assembly
p.
from behind the cutter while a fourth person installs mounting bolts.
5-269