TM 5-3610-253-14
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove the main drive V-belt cover.
Remove the inner V-belt cover.
c.
d. Using modest finger pressure, press down on main gear drive V-belt and
verify belt moves down only 10 mm (.39 in.).
If correct, proceed to step j.
e.
f. If incorrect, adjust tension.
Loosen locknuts on underside of motor adjusting mount.
g.
NOTE
Turning bolts right tighten belt.
h. Turn adjusting bolts until proper tension is obtained. Be sure to turn
both bolts the same amount each time.
i.
Tighten locknuts on underside of motor adjusting mount.
Reinstall inner V-belt cover.
j.
5-447
