TM 5-3610-253-14
(6) Reconnect wiring to new switch.
(7) Install new switch in mounting bracket and secure with bezel nut.
(8) Reinstall switch mounting bracket and secure with screws.
(9) Reinstall cable holddown and secure with screw.
(10) Reinstall fluorescent lamp.
(11) Place operator key back into safety lock.
c.
To replace capacitor, proceed as follows:
(1) Remove toggle switch.
Perform steps b(1) through b(4).
(2) Tag and disconnect capacitor wires from switch.
(3) Remove capacitor retaining nut and defective capacitor.
(4) Install new capacitor and secure with retaining nut.
(5) Reconnect wiring to switch.
(6) Reinstall toggle switch (steps b(7) through b(11)).
5-445
