TM 5-3610-253-14
ad. Pressing the cutting buttons, raise the knife to its upper position.
ae. Insert a sheet of paper under the knife at both ends of the knife.
af. Press down on the clamp foot pedal and hold.
ag. Press both cutting buttons. When knife has completed its cut and reached
the top, verify that both pieces of paper have been completely cut.
ah. If both pieces of paper have been completely cut, proceed to step ai. If
not, perform the following:
(1) Pressing both cutting buttons, lower knife to its lowest position.
(2) Loosen locknuts on knife eccentrics and using handle, adjust the
eccentrics until the knife is parallel; then tighten the locknuts.
(3) Loosen locknuts on turnbuckle and adjust turnbuckle until knife
just touches the cutting stick, then tighten locknuts.
5-441
