TM 5-3610-253-14
f. Manually rotate head to full upward stroke. Holding pawl away from
splines, rotate control collar to position where pawl will engage
cam (alinement point).
Push control collar onto splines and release pawl.
g.
h. Slide retaining ring back into groove.
i. Reinstall rear belt guard and tighten screw.
Plug in power cord.
j.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
Cross Tip Screwdriver
SUPPLIES: Microswitch
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Unplug power cord.
3-66
