TM 5-3610-253-14
NOTE
It may be necessary to adjust control collar at this point.
Replace rear belt guard and tighten screw.
ai.
Plug in power cord.
aj.
3-16.9 Adjust Control Collar.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Unplug power cord.
b. Loosen screw on rear belt guard and remove guard.
Release pawl and rotate stitcher pulley until stitcher head is at
c.
stopping position.
d. Work retaining ring out of groove and slide toward pulley.
Slide control collar off splines until it rotates freely.
e.
3-65
