ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039-12&P
11
11
5
12
Brace Side
Frame Side
13
14
f.
Installation of Support Brace Assembly.
NOTE
If the support brace and floor plate assembly was shipped preassembled, go to
shipped preassembled.
When installing the support brace assembly, the bolts must be installed with the
heads on the brace side and the nuts on the frame side, figures 2-45 and 2-46.
(1) Assemble support brace (5) to rail assembly using two 3/8-16X3-inch hex bolts (11),
two 3/8-16X2-1/2-inch hex bolts (12), eight 3/8-inch washers (13), and four
3/8-16-inch locknuts (14), figure 2-44. Do not tighten bolts completely to allow for
adjustment.
(2) Repeat step 1 for the three remaining support braces (5).
