ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039-12&P
2-10. Install IPADS in M973 Series Small Utility Support Vehicle (SUSV) Continued
(12) Removal of Rear Driver-side Seat/Battery Box Cover
WARNING
To prevent injury to personnel or damage to equipment, remove all rings,
watches, bracelets, etc.
Disconnect negative battery cable before working with or around batteries.
The negative cable is labeled in figure 2-41.
Protect the negative battery cable from accidental contact with other battery
cables or posts
When finished with work, connect negative battery cable last.
(a) Release latches locking rear driver-side seat/battery box cover in place.
(b) Lift and remove seat from vehicle. Set seat aside for later installation.
(c) Disconnect cable to negative battery terminal (outboard end of battery) using 1/2-inch open-end
wrench from SUSV BII, figure 2-41.
(d) Disconnect connector P42 at location indicated in figure 2-41.
