TM 5-3610-253-14
Table 5-9. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. HYDRAULIC SYSTEM IS NOISY DURING OPERATION.
Step 1.
Check for air in system.
(a) Bleed air from system (paragraph 5-20.23).
(b) If malfunction persists, replace pump (paragraph 5-20.5).
8.
PAPER CUTTER POWER SWITCH ON, MAIN MOTOR STARTS, ALL OTHER FUNCTIONS
INOPERATIVE.
WARNING
Electrical shock hazard. You must stand on rubber matting as a protective
measure before performing this procedure. Death or serious injury may
occur.
Step 1.
Check main circuit breakers on PC card HP as follows:
a.
Remove plastic plugs covering screw holes on HP card cover panel.
b. Remove mounting screws and panel.
Turn main power switch off (0).
