TM 5-6675-324-14
NOTE
If first significant digit of CL is in ones Column (one place to left
of decimal point), multiply auto-scaler LED display by 10.
If first significant digit is in tens column, multiply auto-scaler LED
display by 100.
If first significant digit is three or more places to left of decimal
point, increase multiplication factor by 10 for each position it lies
further to the left.
w.
Point counts with point counter pen and constants.
(1) Assemble QPS with point counter pen.
(2) Activate QPS.
(a) Plug foot switch into ACCU input jack on back panel of auto-scaler.
(b) Plug linear measuring probe into E1 encoder socket on back panel of
auto-scaler.
(c) Plug power transformer cable into POWER supply jack on back panel of
auto-scaler.
(d) Plug power transformer cable into wall outlet.
(e) Plug power cord into wall outlet.
(f) Set encoder OFF/E2/E1 switch on back panel of auto-scaler to OFF.
(9) set encoder OFF/E2/E1 switch on back Panel of auto-scaler to E1.
(h) Set auto-scaler B/ACCU/A/OFF switch to A.
(i) Set auto-scaler MAN/AUTO switch to MAN.
(j) Set auto-scaler X MEMORY switch to 1.
(k) Set calculator OFF/ON switch to ON.
(1) Set calculator MAN/TRACE/NORM switch to NORM.
(m) Set calculator PRGM/RUN switch to RUN.
5-69
