TM 5-3610-253-14
w.
Reinstall gear limit switches and mounting plate.
Reinstall the nylon cams and washers/spacers.
x.
Reinstall the cover over the gear limit switches.
y.
Add gear oil to gear box as necessary to fill.
z.
Perform knife replacement procedures to readjust all carrier adjustments
aa.
ab.
Bleed the hydraulic system (paragraph 5-40.65).
MOS: 35E, Special Electronic Devices Repairer
Flat Tip Screwdriver
TOOLS:
13 mm Combination Wrench
SUPPLIES:
Safety Bolt Proximity Switches
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
Turn off power.
a.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove the cover from the safety bolt.
5-601
