TM 5-3610-253-14
t.
Reinstall the shear bolt.
u.
Manually position the knife to its uppermost position.
v.
Reinstall the eccentric cover.
w.
Remove reset handles.
Rotate clutch plate to the left to cover the override holes.
x.
Remove main power switch knob and reinstall it onto the control panel.
y.
z.
Reinstall the main motor V-belt cover.
Perform knife replacement procedure to readjust all carrier adjustments
aa.
5-40.45 Replace Gear Limit
Switches.
MOS:
35E, Special Electronic Devices Repairer
TOOLS:
Flat Tip Screwdriver
5 mm Hex Head Key Wrench
SUPPLIES:
Gear Limit Switches
Wire Ties
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a.
Turn off power.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove the limit switch cover.
c.
Remove the rear electronics enclosure cover.
d. Cut wire ties as necessary.
5-596