TM 5-3610-253-14
h.
i.
Reinstall front electronics enclosure cover.
Place operator key back into safety lock.
j.
5-40.44 Replace Connecting Rod Assembly.
MOS: 83FJ6, Reproduction Equipment Repairer
Flat Tip Screwdriver
TOOLS:
Ball Peen Hammer
Pin Punch
Two 32 mm Combination Wrenches
19 mm Socket with 3/8 in. Drive
19 mm Combination Wrench
Pry Bar
SUPPLIES:
Connecting Rod Assembly.
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a.
Turn off power.
(1) Turn Star-Delta switch to Y position, then to O position.
(2) Turn main power switch to O position.
(3) Using operator key, lock safety lock and keep key in your
b. Remove the main motor V-belt cover.
c.
Remove main power switch knob.
d. Install main power switch knob onto shaft of clutch plate.
e.
Rotate knob to the right to uncover the clutch override holes.
f. Insert the reset handles into the override holes and rotate to the right
until the threads engage. Tighten handles.
NOTE
It may be necessary to remove the safety bolt cover and hold the safety
bolt back to move the knife through its movement.
5-594