TM 5-3610-253-14
Remove mounting screws and defective switch.
e.
f. Install new switch and secure with screws.
Reconnect wiring and close switch cover, securing with screw.
g.
h. Adjust switch in a manner so that when the false clamp is stored, the
switch is activated.
i.
Reinstall front electronics enclosure cover.
Place operator key back into safety lock.
j.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
Ball Peen Hammer
Pin Punch
36 mm Combination Wrenches (2)
19 mm Socket with 3/8 in. Drive
3/8 in. Drive Ratchet
19 mm Combination Wrench
Pry Bar
SUPPLIES: Connecting Rod Assembly
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove the main motor V-belt cover.
c. Remove main power switch knob.
d.
Install main power switch knob onto shaft on safety plate.
5-264
