TM 5-3610-253-14
Reconnect wires.
g.
h. Reinstall backgauge control switch cover.
i.
Place operator key back into safety lock.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: Flat Tip Screwdriver
5 mm Hex Head Key Wrench
Cross Tip Screwdriver
SUPPLIES: Switch
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove front electronics enclosure cover.
Loosen captive screw on switch cover and lower cover.
c.
d. Tag and disconnect wiring from defective switch.
5-263
