TM 5-3610-253-14
h.
Remove defective valve from reservoir.
i.
Remove mounting hardware.
Reinstall fittings and new seals to new valve.
j.
k.
Install new valve into reservoir.
l.
Reinstall mounting plate, gasket, and retaining screws.
m.
Reinstall hydraulic lines and tighten fittings.
n.
Reinstall lever to valve and tighten retaining screws.
o.
Reinstall right pillar cover.
Bleed hydraulic system and add fluid if necessary (paragraph 5-20.23).
p.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Flat Tip Screwdriver
4 mm Hex Head Key Wrench
SUPPLIES: Suction Hose
Hydraulic Fluid (Item 12, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove main drive V-belt cover.
5-238
