TM 5-3610-253-14
g.
Remove pump filter and pipes connected to pump. Clean filter with
solvent and dry thoroughly.
h.
Remove mounting bolts, plate and defective pump.
i.
Using new gasket and copper washers, install new pump into reservoir.
Reinstall pump filter and reconnect pipes to pump.
j.
k.
Reinstall the hydraulic pump pulley.
l.
Reinstall the main motor V-belt (paragraph 5-16.4).
m.
Fill the reservoir with 17 liters (4.5 gallons) of hydraulic fluid.
n.
Manually rotate the main motor to the right several times to lubricate
the hydraulic fluid pump.
o.
Bleed the hydraulic system (paragraph 5-20.23).
5-20.6 Service Hydraulic Fluid Filter.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
13 mm Socket 3/8 in. Drive
3/8 in. Drive Ratchet
6 mm Hex Head Key Wrench
22 mm Combination Wrench
SUPPLIES: Hydraulic Fluid Filter
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove main motor V-belt cover.
5-242
