TM 5-3610-253-14
i.
Have an assistant press and hold the cutting buttons.
WARNING
Always keep clear of moving parts while performing this task. Serious
injury may occur.
Manually lower the knife to the height of the clamp.
j.
k. Check the clearance between the knife and the clamp.
l.
Release the cutting buttons.
m.
If the space is greater than 0.3 mm (.012 in.), remove foils behind side
n.
Manually position knife to its uppermost position.
o.
Remove knife reset handles and rotate safety plate to cover override
holes.
5-233