TM 5-3610-253-14
Install nine new O-rings to new control block, smearing O-rings with
j.
grease to prevent movement.
k. Reinstall control block to connecting plate and retain with bolts.
l.
Reconnect electrical connections to solenoids.
m.
Add clean hydraulic fluid to reservoir and bleed hydraulic system
5-20.3 Replace Control Valve.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS:
Flat Tip Screwdriver
4 mm Hex Head Key Wrench
5 mm Hex Head Key Wrench
6 in. Adjustable Wrench
SUPPLIES: Slide Valve
Fitting Seals
Hydraulic Fitting
Hydraulic Fluid (Item 12, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a.
Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove main drive V-belt cover.
5-236
