TM 5-3610-253-14
Turn main power switch to O position.
p.
Reinstall main motor V-belt (paragraph 5-16.4).
q.
Reinstall main motor V-belt cover.
r.
5-20.2 Replace Control Block.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
3/8 in. Drive Ratchet
5 mm Hex Head Socket Bit
8 mm Hex Head Socket Bit
3 in. Extension
Fluid Evacuation Pump
SUPPLIES: Control Block
Control Block O-Rings
Grease (Item 11, Appendix E)
Hydraulic Fluid (Item 12, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power is
turned off before servicing.
a. Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock safety lock and keep key in your
b. Remove main motor V-belt cover.
5-234
