TM 5-3610-253-14
NOTE
If necessary, slide bracket may be moved to obtain the proper switch
travel adjustment.
h. Move switch toward cam until all slack is removed, then move switch
away from cam 0.8 - 3.2 mm (1/32 - 1/8 in.) and tighten screws.
i.
Adjust clearance as follows:
(1) Press and hold foot pedal down.
(2) Measure the clearance between the switch button and cam. Clearance
should be 0.50 0.05 mm (0.020 0.002 in.).
(3) If clearance is incorrect, loosen the bolt and move the gap
adjusting bracket to obtain the proper clearance and retighten bolts.
(4) Check adjustment of pedal cam on opposite side and adjust it for
proper operation as performed in previous steps.
j. Reinstall front and rear electronics enclosure covers.
k. Place operator key back into safety lock.
5-164
