TM 5-3610-253-14
Table 5-6. TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
11. FLUORESCENT TABLE LAMP WILL NOT COME ON.
Turn lamp switch to right and then back to left. Check to see if light comes
on.
(a) If light does not come on, replace fluorescent lamp
(b) If light does not come on, replace starter (paragraph
(c) If malfunction persists, refer to organizational mainte-
nance.
12. OPTICAL CUTTING LINE ABSENT.
Press control power on switch. Turn lamp switch to right. Turn off
overhead lights above table. Check to see if line appears.
(a) If lights do not come on, replace OCL bulbs (paragraph
(b) If malfunction persists, refer to organizational mainte-
nance.
13. OCL TOO WIDE OR FUZZY.
Step 1.
Lift top cover and check to see if both OCL bulbs are lit.
(a) If bulbs are not 1 it, replace burned out bulb (paragraph
(b) If lit, proceed to step 2.