ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039-12&P
2-10. Install IPADS in M973 Series Small Utility Support Vehicle (SUSV) Continued
8
7
2
3
7
6
4
5
1
k. Plumb Bob Assembly Installation. The plumb bob assembly fits just inside the driver's side front door of
the vehicle.
(1) Install plumb bob assembly (1) on the driver's seat support located inside the driver's door using two
M6 hex head screws (4), two M6 washers (5), two M8 hex head screws (6), four M8 washers (7), and
two M8 locknuts (8) (plumb bob assembly bolts), figure 2-51.
(2) Tighten M6 screws using a 10-mm wrench and socket until snug plus 1/4 turn.
(3) Tighten M8 screws using a 13-mm wrench and socket until snug plus 1/4 turn.
