TM 5-6675-318-14
Table 4-13. CODE 46 DISPLAYS FOR TRANSLOCATING FROM TAPE - Cont
If reset was selected, the unit asks for the site where the tape was recorded. Use
the +/- key to select either the control or the remote site. Then press the enter
(E) key.
Control Site Selected
The unit then reads satellite pass data from the tape cassette and computes a
translocation position fix based on that data.
Reading Tape
While the unit is processing data from a particular pass, it displays that pass
number.
Processing Pass 17
When the unit finishes processing all pass data, it displays SITE if a new site
record is encountered; END if the end of data on tape is encountered; or DONE if all
corresponding data in memory from the other site has been used.
Done Processing
4-92