TM 5-6675-318-14
Table 4-12. CODE 40 DISPLAY FOR LOADING TAPE
This code is operative only in the off-line mode. Enter code 40 to load satellite
data from a tape into the memory for subsequent translocation processing, The tape
will stop after reading a site record. Code 40 must be re-entered to continued.
When code 40 is entered, the unit asks the user how many satellite passes to load.
Initial Display
Enter either no number, one number, or two numbers. Entering no number causes all
passes in the site to be loaded into memory.
Entering one or two numbers indicates
the number of passes to load into memory.
Load 5 Passes
To load all passes up to and including a pass which is identified by a pass number
on the tape, enter a 0 digit, space, then the pass number.
After selecting the passes to be loaded, press the enter (E) key.
Load to Pass 38
When available memory is full, loading stops with FULL being displayed. When
loading stops at the end of tape data, END is displayed.
Available Memory Full
4-89
