TM 5-6675-318-14
Table 4-11. CODE 47 DISPLAYS FOR 3D POSITION FROM TAPE
This code is operative only in the off-line mode.
Enter code 47 to compute a 3D
position fix from the raw satellite data on tape.
The tape will stop after reading
a site record .
Code 47 must be recentered to continue.
When code 47 is entered, the unit asks the user how many
process.
s a t e l l i t e p a s s e s to
I n i t i a l D i s p l a y
Enter either no number, one number, or two numbers. Entering no number causes all
passes in the site to be processed.
Entering one number indicates the number of
passes to process in the 3D position computation.
Process 5 Passes
To process all passes up to and including a pass which is identified by a pass
number on the tape, enter a 0 digit, space, then the pass number.
Entering no
number causes all passes in the site to be processed.
Process to Pass 38
After selecting the passes to be processed, press the enter (E) key.
The unit then asks whether or not the 3D position computation should be reset.
Reset should be selected only at the beginning of a 3D position computation.
4-85
