TM 5-3610-286-10
2-7.
OPERATING PROCEDURES
b.
Prepare Paper Cycle
(CONT)
(Cont)
(bb) Adjust air blast for front sheet edge by turning valve (1)
until slot in head is in vertical position for maximum blast.
(cc) Open lateral sheet separation valve (2) and adjust lateral
sheet separators (3) as required (depending on size of paper being used).
(3) Prepare Double Sheet Detector and Electronic Sheet Detector
(a) Obtain four strips of paper 3 by 12 in. (7.62 by 30.48 cm) of
same thickness as paper in feeder.
NOTE
Ensure that the SAFETY/OPERATION button is turned to
the OPERATION position.
(b) Take Printing Press off safe. Press OPERATION pushbutton
to start Printing Press.
(c) Press FEEDER ON pushbutton to engage feeder.
2-38
