TM 5-3610-286-10
2-7.
OPERATING PR0CEDURES (CONT)
b.
Prepare Paper Cycle (Cont)
(s) Put Printing Press on safe.
Insert 0.10 mm feeler gage under
front lay (1) and tap on front lay until tight. Take printing Press off
safe and inch until socket head screw (3) is accessible.
(t) Put Printing Press on safe.
Tighten socket head screw (3).
(u) Reset front lay height adjustment screw if thickness of paper
being used is greater than 0.004 in. (0.10 mm).
(5) Prepare Sheet Smoother
(a) Press and turn SAFETY/OPERATION button (1) to SAFETY position
to set Printing Press for inching.
(b) Take Printing Press off safe. Press and hold FORWARD
pushbutton (2).
(c) Press FEEDER ON pushbutton (3) to engage feeder.
2-43
